Solvent Extraction Plant

Approx. Rs 300 Lakh / Unit

Minimum Order Quantity: 1 Unit
Brand: Servotech
Material: Solvent
Capacity: Upto 2500 TPD
Automation Grade: Automatic
Power Source: Electricity
Design Type: Efficient
Installation Services: Yes
Grade: Automatic,Semi-Automatic,Manual
Thickness of flakes: 0.25 to 0.28 mm

We are the leading manufacturers and exporter of Solvent Extraction Plant and our product is made of good quality.

The plants are ergonomically designed and are energy efficient, consistent in output quantity and quality, operator friendly and generate less affluent.

The level of plant automation depends upon client requirement. These plants are more efficient than the traditional hydraulic press, Ghani or continuous screw.

The solvent extraction plants are used where oil is extracted from oil seeds like soybean, sunflower, cottonseed, other oil seeds and oil cakes like mustard cake, groundnut cake, and rice bran.

Preparatory Section
Extraction Section
Conditioning Section
Distillation Section
Recuperation Section

Features:-

Continuous operation
Low oil residue in extracted meal
Low power and steam consumption
Low solvent loss
Low sediment in the extracted oil
Extractors with automatic feeding function

Following are the different stages into which the entire extraction process is divided:

Preparation Of Raw Material (Seed Preparatory Section)There are 3 different types of Soyabeans viz. brown, yellow and black with 18 - 22% content of oil.

These Soyabeans are firstly cleaned, graded and then finally fed into the cracker, where these are cracked into small pieces. T
he gap between the cracker rolls should be adjusted in such a way as to avoid powder of the beans.

As to separate the hulls, a hull- separator is attached to the cracker machine into which the material is received.

The broken meats with some content of hulls are carried on the vibratory deck into the hopper whereas, the powdery material called ‘chuni’ is collected at the lower most deck.

A current of air is passed for minimizing the content of hulls in the material. After this, the material is passed into the cooker conditioner for further processing.

A jacket steam along with the injection of open steam is applied for complete conditioning of the beans.

There is a flaker machine into which the conditioned meats are fed and then processed through a pair of smooth rolls rotating at the same speed in opposite direction.

Compression springs or hydraulic power pack is attached in the rolls due to which the thickness of flakes is adjusted.
Generally, the thickness of the flakes coming out of the machine is about 0.25 to 0.28 mm.

After flaking, the Soyabeans are fed into the expander for preparing the cakes and collets.

In order to remove the moisture from the collets generated from the expander, these are fed in dryer cooler and cooled up to the extraction temperature.

Finally, the cooled collets free from moisture are fed to the extraction system through Redler 186.

Process Description for Continuous Solvent Extraction Plant

The process of solvent extraction results into a solution of the oil in a solvent by diffusing solvent into the oil- bearing of raw materials. Different types of solvents can be used for this purpose, but among all those, hexane is extensively used in the solvent extraction due to its low boiling point.

Additional Information: